Car Ghost Immobiliser
Ghost Immobiliser, an advanced system that stops your vehicle from starting if there is no unique code input via existing buttons. The device is inaccessible to thieves and is quiet to operate.
It also helps deter newer methods such as hotwiring and relay thefts. It could also result in a decrease in your insurance cost.
No Radio Frequencies
A ghost immobiliser is different from a conventional one in that it doesn't transmit radio frequency, which makes it impossible for thieves to bypass the device by using a low-cost key cloning device. Ghost immobilisers stop your car from starting even in the event that a thief has copied or stolen your key.
A ghost immobiliser could also be used to stop relay attacks. The signal from your keyfob is amplified to trick the system into allowing your car to begin. The Ghost will recognise this and will not allow you to start the car until you enter the PIN code. This is a fantastic way to combat tech-savvy car thieves who have simple-to-use and inexpensive equipment to clone your vehicle.
The Ghost can be installed in a discreet manner, without causing damage to your vehicle. It will only function when the correct pin sequence has been entered. This will only be known by the owner who installed it, which means that no one will be able to use your car until they know the pin sequence. Some systems allow owners to set up valet or service mode so that they can temporarily allow another person to drive the vehicle without having to disclose their pin code, guarding them against thieves who might steal.
The Ghost is not just easy to use and quick to dearm, it can also be linked to a car tracker, so that you can track your vehicle. Some insurers offer discounts on insurance for vehicles with Ghosts installed. This is great news as it increases the security of your vehicle.
Although the Ghost immobiliser isn't Thatcham approved however, it is an aftermarket item that has been tested by an independent party and proven to work. Ask the seller of a secondhand vehicle that has the Ghost installed if they can transfer it to your vehicle. This will ensure that your new vehicle is more secure than it was if the previous owner had not transferred it.
No Circuit Cuts
The absence of circuit breaks means that even when the vehicle is taken away, thieves will not be able to start it. They will require knowledge of the sequence of buttons that is used to unlock your vehicle and will be unable to do so without being aware of this information. This will discourage them and prevent them from attempting to steal.
If you have an GPS tracker installed, your Ghost can also function as an anti-theft device since it can send an alert to the tracker which will trigger a siren and notify the tracker of any attempted theft. This feature can be activated at any time from your online dashboard.
When you link your Ghost to your CAN data network it will identify the vehicle and its owner through the unique pin code created at the time of installation. This allows the device to connect directly with the ECU of your vehicle and disable its engine. This means that the engine will only be started when it is authorized by the owner of the vehicle or someone who has an active PIN code.
Since the pin code is created from existing buttons within easy reach of the driver (such as cruise control and stereo mute) it is mathematically inaccessible to be deciphered by potential thieves. Your engineer will also provide you with an emergency Pin Code override card which is similar to a scratch-off lottery ticket and only requires scratching off to reveal the code and the instructions.
Your Ghost is not detectable by these methods, as it doesn't use circuit breaks or radio frequencies. It is therefore unaffected by the modern techniques used by organized gangs who are experts in the use of RF scanning technology as well as code-grabbing. It's a lifetime item that is easily removed from your vehicle if you decide to sell it. This means that you will not lose any of the security that you have invested in.
No Key Fobs
In the UK Vehicle theft is increasing in the UK. It is imperative to take proactive measures to protect your prized cars from opportunistic criminals. The innovative Ghost Immobiliser Autowatch's Ghost Immobiliser Autowatch offers a solid defense against key cloning, hacking, and signal relay attacks. It is a discrete and highly effective car safety system that is simple to install by anyone.
In contrast to traditional systems that depend on key fobs, the Ghost immobiliser is not equipped with LED indicators and is not operated through the signal relay. This means it is not affected by signal interception and cannot be activated with stolen or damaged remotes. It's also tamperproof and doesn't have any external wiring making it difficult to take off.
It safeguards you from key-long hacking as well as key theft by preventing your engine from starting until a specific PIN is entered. This is done by using buttons already present on the vehicle, like those on the steering wheel or doors.
This is the only way to start your engine and it will only work when you have entered the correct pin code. This makes it impossible for opportunistic thieves to steal your car. It is designed to be simple for you to use. If you are concerned about losing your pin code and want to know the pin code, request the installer to provide you with a driver's fob that lets you drive the car like you normally.
The absence of key fobs and LED indicators also means that the Ghost immobiliser is not detectable by diagnostic equipment or RF scanners employed by thieves to detect the presence of an electronic system. This stealth installation enhances the security of the system and allows it to be installed in a location that is difficult for thieves.
Ghost immobilisers are a cheap and highly effective deterrent against theft. They also increase the resale value of your vehicle. They are also accepted by a few insurance companies and may result in reduced premiums.
No Damage
If your car is fitted with a ghost ignition system, you will have the peace of mind in knowing that your vehicle is protected against hacking, cloning, key fob theft, and other typical methods of theft. This is particularly important if you've spent a lot of money and time customising your vehicle or have an uncommon or expensive model. Ghost immobilisers operate in a silent manner leaving no trace of the instillation process and requiring no new parts to be fitted.
The system lets you create an individual pin code that needs to be entered in order for the engine to begin. It uses buttons on your steering wheel or console, as well as on your door panels. The sequence can be changed by you at any time, ensuring that even if a thief knows your pin number, they cannot start your car. It is also simple to disable the device when it is in an unservice valet mode so that your vehicle can be driven away for cleaning, servicing or for an MOT without being activated.
The thief won't be able start your vehicle in the event that it is copied and they'll be caught. The system will also alert you to any tampering of the wiring in your vehicle for example, signal interference or cutting. This information can be transmitted to your smartphone so that you are always aware of the security status of your car.
However, there may come ghost vehicle immobiliser when you're looking to take off or disable the Ghost Immobiliser for maintenance or for resale. In this instance you'll need follow a specific procedure in order to disconnect the device without causing harm to the wiring system in your vehicle. Wearing protective gloves and flashlights is recommended during this procedure. You may also consult any documentation you have like user manuals or installation instructions, to determine the exact location of the device.
Once the immobiliser is disconnected from your vehicle's wiring system, you can reconnect the battery to your car and then test to ensure that it functions correctly and that all electrical components are functioning as intended. The next step is to insulate and join any wires that were cut using soldering or electrical tape when necessary. Make sure that no exposed wires are found, and that any dangling wires are secured with zip ties or other appropriate methods. To ensure that your vehicle is not damaged during the removal process, schedule a professional vehicle checkup.